We ship to Canada
our Prices do not include
Tax & Merchant Fees
.
|
G7100+2*AFX24-MFT-X1
|
|
MSRP:
$6,399.00
Price:
$2,911.55
You Save:
$3,487.45 (54 %)
Personalization
Select desired valve porting: Port Setup refers to valve ports A to AB
If needed, use the space below to type in any special valve configuration required for your order:
You may not enter more than 300 characters for 'Custom Setup:'.
Custom Setup:300 characters remaining
Enter Valve Tag Info here:
You may not enter more than 54 characters for 'Tag Info:'.
Tag Info: (+ $10.00)(Update Price)54 characters remaining
Select MFT Control Code ("A01" 2-10VDC is the default)
* Whole number only
|
Belimo Part Number: G7100+2*AFX24-MFT-X1
3-way Mixing Flanged Globe Valve, Bronze or Stainless Steel Trim
Application: This valve is typically used in Large Air Handling Units on heating or cooling coils. This valve is suitable for use in a hydronic system with variable flow. | Valve Type | G7100 | | Valve Size | 4" [100] | | Cv Rating | 190 | | Flow Rating | -- | | Flow Pattern | 3 Way Mixing / Diverting | | Flow Characteristic | linear | | Service | chilled or hot water, 60% glycol | | Action | stem up - open B to AB | | End Fitting | 125 lb. flanged | | Material (body) | iron | | Material (ball) | -- | | Material (plug) | bronze | | Material (disc) | -- | | Material (stem) | stainless steel | | Material (seat) | bronze | | Material (seat O-rings) | -- | | Material (characterizing disc) | -- | | Media Temp Range (water) | 32°F to 350°F [0°C to 176°C] | | Media Temp Range (steam) | 32°F to 280°F [0°C to 138°C] | | Maximum Inlet Pressure (steam) | -- | | Maximum Inlet Pressure (water) | 150 psi (1034 kpa) @ 250°F | | Leakage | Class III | | Rangeability | 50:01:00 | | | | Actuator | 2*AFX24-MFT-X1 | | Fail-Safe | Spring Return | | Torque | 180 in-lb [20 Nm] | | Control Input | Proportional/MFT | | Input Impedance | 100 kΩ for 2 to 10 VDC (0.1 mA), 500 Ω for 4 to 20 mA, 1500 Ω for PWM, Floating Point and On/Off | | Position Feedback | 2-10 VDC Feedback | | Running Time (motor) | 150 seconds | | Running Time (fail-safe) | <20 sec @ -4°F to +122°F [-20°C to +50°C], <60 sec @ -22°F [-30°C] | | Auxiliary Switch | No | | Power Supply | 24 VAC ± 20%, 50/60 Hz, 24 VDC +20% / -10% | | Power Consumption | Running: 7.5 W; Holding: 3 W | | Transformer Sizing | 10 VA (class 2 power source) | | Electrical Connection | 3 ft, 18 GA appliance cable, 1/2" conduit connector | | Overload Protection | electronic thoughout 0 to 95° rotation | | Shaft Diameter | -- | | Angle of Rotation | 95° (adjustable with mechanical end stops) | | Direction of Rotation (motor) | reversible with built-in switch | | Direction of Rotation (fail-safe) | reversible with CW/CCW mounting | | Position Indication | visual indicator | | Manual Override | 5 mm hex crank (3/16" Allen), supplied | | Humidity | 5 to 95% RH non condensing (EN 60730-1) | | Ambient Temperature | -22°F to +122°F [-30°C to +50°C] | | Ambient Temperature (safety) | -- | | Storage Temperature | -40°F to +176°F [-40°C to +80°C] | | Noise Level | <40dB(A) motor @ 150 seconds, run time dependent, <62dB(A) spring return | | Housing Material | zinc coated metal and plastic casing | | Housing | NEMA type 2, IP54, enclosure type 2 | | Agency Listing | cULus acc. To UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. To 2004/108/EC & 2006/95/EC | | Quality Standards | ISO 9001 | | Weight | 4.6 lbs (1.9 kg.), 4.9 lbs (2 kg.) with switch |  Technical Data Sheet
Item Number:
G7100+2*AFX24-MFT-X1
Manufacturer:
Belimo
Manufacturer Part No:
G7100+2*AFX24-MFT-X1
|
|